Share this page

EBC 572

5.25" Intel® Pentium® M/Celeron® M Board with LVDS/Dual LAN
  • Main Feature
  • Supports Intel® Pentium® M/ Celeron® M Processor Up to 2 GHz+ with 400 MHz FSB
  • Intel® 855GME Chipset For EBC 572/572A/ EBC 572(LF), Intel® 852GM Chipset For EBC 572-C65/ EBC 572(LF)-C65
  • 2 x 184-pin DIMM, Supports DDR 200/266/333 Memory Up to 2 GB
  • 2 x Intel® 82551QM/82562 EM 10/100 LAN
  • Supports 36-bit LVDS
  • PC/104 and CompactFlash Socket
Add to Inquiry
Datasheet(PDF)
CPU Support Single Micro-FCPGA Socket 478 Supports Intel® Pentium® M processor up to 1.7 GHz with 1 MB L2 Cache, 400 MHz FSB Supports Intel® Pentium® M processor up to 2.0 GHz with 2 MB L2 Cache, 400 MHz FSB Supports Intel® Celeron® M processor from 600 MHz up to 1.5 GHz with 512 KB on-die L2 Cache, 400 MHz FSB Optional on-board Intel® Micro-FCBGA 479-pin Pentium® M/ULV/LV Pentium® M processor
Main Memory 2 x 184-pin DIMM sockets, up to 2 GB unbuffered DDR 200/266/333/400 SDRAM 855GME model supports ECC memory 852GM model does not support ECC memory
Chipset Intel® 855GME Chipset For EBC 572(104), Intel® 852GM Chipset For EBC 572(104)-C65 Intel® 82801 DB (ICH4)
BIOS Award System BIOS Plug & Play support ACPI 1.0b compliant 4 Mbit fl ash ROM
On-board LAN 1 x Intel® 82551QM 10/100 Fast Ethernet LAN 1 x Intel® 82562EM 10/100 Fast Ethernet LAN
Display Intel® 855GME/852GM chipset integrated with graphics controller Up to 64 MB of dynamic video memory Hardware motion compensation assist for software MPEG/DVD decoder VGA: 2.0 mm pin header for CRT output LVDS: DF13-20DP, 2 x 20-pin connector, support 18/24-bit single pixel or 18-bit dual pixel LVDS panel
I/O Interface Serial port: 1 x 40-pin header, supports 4 x 16C550 UARTs (3 x RS232 + 1 x RS232/422/485) USB: 4 ports, with 1x6 JST (2.0 mm) LAN: 2 x 10/100 Ethernet LAN (180 degree. Optional 90 degree RJ45 connector by request) HDD: Ultra ATA 100/66/33 support, 1 x 40-pin connector 1 x CompactFlash socket Parallel port: bi-directional, EPP/ECP support, 1 x 26-pin box header FDD: 1 x slim type connector PS2:1 x 6-pin JST (2.0mm) Audio: ICH4 supports AC’97, optional EBK AC'97 supports Line-in, Mic-in, Speaker-out Digital I/O: 4-bit TTL input, 4-bit TTL output (+3.3 V) On-board buzzer / SMBus 2.0 controller / Reset Switch / IDE active LED ATX Power Switch: 3 x 2-pin header
On-board RTC On-chip RTC with battery back up 1 x External Li-Lon battery
Storage HDD: 1 x 40-pin IDE connector (Secondary)
System Monitor Derived from super I/O to support system voltage, fan speed, temperature monitoring
Power Input 20-pin ATX, power input connector
Power Requirements Pentium-M 1.6 GHz: +12 V, +5 V, 3.3V Full-Loading Mode: 0.1 A, 5.15 A, 0.5 A NOTE: 1. 5VSB is depending on standby power require. 2. Full Loading: Utilize CPU 100% with Burn-in test running.
Dimensions 5.25" form factor, 203 mm(L) x 146 mm (W) (7.9" x 5.7")
Environment Board-level operating temperature: -20°C to 60°C Storage temperature: -20°C to 80°C Relative humidity: 10% to 90% (Non-condensing)
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!