Specifications
| CPU Support | - Single 478 uFCPGA/479 uFCBGA socket
- Supports Intel® Pentium® M: 1 or 2 MB L2 Cache, 400 MHz FSB, speeds up to 1.8 GHz
- Supports Intel® Celeron® M: 512 KB or 1 MB L2 Cache, 400 MHz FSB, speeds up to 1.5 GHz
|
| Main Memory | - 1 x 200-pin SODIMM for up to 1 GB Unbuffered non-ECC DDR 200/266 SDRAM
- DDR 333/400 is also compatible but runs at 266 MHz
|
| Chipset | - Intel® 852GM
- Intel® 82801DB (ICH4)
|
| BIOS | - Award System BIOS / 4 Mbit flash ROM
- ACPI(Advanced Configuration & Power Interface) support when 5 Vsb power available
- APM (Advanced Power Management) support
|
| On-board LAN | - 1 x Intel® 82541ER Gigabit Ethernet LAN
- 1 x RJ45 with LED
|
| Display | - Intel® 852GM with integrated graphics, up to 64 MB of Dynamic Video
|
| Memory Allocation | - VGA interface: D-sub 15-pin for standard CRT
- CRT Resolution: 1600 x 1200 at 85 Hz and up to 1920 x 1440 at 60 Hz
- Internal LVDS: Supports 18/24-bit single pixels or 18-bit dual pixels LVDS panel (Resolution up to 1280 x 1024)
- Dual display: CRT + LVDS LCD
|
| I/O Interface | - Serial port: 1 x 40-pin box header, RS232 x 4 (OM2 RS232/422/485 by switch)
- USB 2.0: 4 ports (USB 1 is edge connector, USB 2 via box Header, USB 3 ~ 4 via pin header)
- HDD: Ultra ATA 100/66/33 support, 1 x 40-pin connector
- CF: 1 x CompactFlash socket
- Parallel Port: 1 x 26-pin connector
- PS/2 Keyboard/Mouse: 1 x 6-pin Mini-Din connector
- Digital I/O port: 8 sets of general purpose I/O each with TTL level interface
- 1 x on-board buzzer / 1 x IrDA Header / 1 x on-board 2-pin header for reset
- 5-pin for key lock, 2-pin for power LED, 2-pin for HDD Power LED
- I/O On Bracket: 1 x VGA DB-15 connector, 1 x RJ45 Gigabit Ethernet LAN port, 1 x Mini-DIN for Keyboard/Mouse, 1 x USB 2.0 Port
|
| Watchdog Timer | - 1 ~ 128 second time-out intervals
|
| On-board RTC | - On-chip RTC with battery back up
- 1 x External Li-Ion battery
|
| IDE | - HDD: Ultra ATA 100/66/33 support, 1 x 40-pin connector
- 1 x CompactFlash socket
|
| ISA Support | - 1 x ITE 8888F PCI to ISA Bridge
- Supports a Maximum of 4 ISA slots on the backplane (PCI-ISA Backplane)
|
| System Monitor | - One fan speed (For CPU)
- System monitor controller derived from IT8712
- 7 voltage (For Vcore, +1.05 V, +1.2 V, +2.5 V, +3 V, +5 V, +5 Vsb)
- 2 temperature (one for CPU internal use, another for external system use)
|
| Dimensions | - Half-size PCI-ISA SBC : 186.5 mm (L) x 127.5 mm (W) (7.3" x 5.0")
|
| Power Input | - Power source from backplane through PCI/ISA golden finger
- Supports either AT or ATX Power Supplies
- +3.3 V is converted from +5 V not directly from backplane or power supply
- +5 Vsb (standby power) is connected from backplane through 3-pin connector
- 6-pin power input connector for standalone operation
|
| Power Requirements | - Full Loading: Windows 2000 running HCT 9.5 and K power utility (CPU and System 100% Loading)
- +12 V: 0.12 A
- +5 V: 6.9 A
|
| Environment | - Operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
|
| Certifications | |