Specifications
| CPU Support | - Supports Intel® LGA775 Core 2 Duo / Pentium® 4 / Pentium® D / Celeron® D processors
- Intel® Embedded Processors List (Intel® Longevity CPU): Intel® Core™ 2 Duo Processor E6400 & E4300 & E2160; Intel® Pentium® 4 Processor 651 & 551 & 531; Intel® Celeron® D Processor 352 & 341; Intel® Celeron® Processor 440
- 533/800/1066 MHz System Bus
|
| Main Memory | - 2 x 240-pin DIMM, support Dual channel 533/667/800 MHz SDRAM DDR2 memory up to 4 GB (Note: Maximum 4 GB. Actual memory size is dynamic based on the OS I/O resource allocation)
|
| Chipset | - Intel® Q965 Graphics Memory Controller Hub (GMCH)
- Intel® 82801HB (ICH8) I/O Controller Hub
|
| BIOS | - Award System BIOS
- Plug & Play support
- 8M-bit flash ROM
|
| On-board LAN | - 2 x Intel® 82573L PCI Express Gigabit Ethernet LAN
- 2 x RJ45 with LED
- Supports Boot From LAN (PXE)
- Supports Wake on LAN (When 5Vsb power available, and for LAN 2 only)
|
| Display | - Intel® Q965 GMCH Integrated Intel® GMA 3000
- Max 256 MB of DVMT for graphics memory
- CRT: 1 x DB15 VGA connector, Resolution up to 2048 x 1536
|
| I/O Interface | - USB 2.0: 6 ports, 2 ports through I/O bracket, 4 ports through 1x6 JST
- Serial port: 2 ports, with 2x5 box header(2.0mm) , supports RS232 only
- Parallel port: 1 port, with 2x13 box-header(2.0mm)
- PS2: 1 x 6-pin JST connector(2.0mm) for KB/ Mouse
- Fan: 4-pin wafer for CPU; 3-pin wafer for System; 3-pin wafer for MCH
- 2-pin header for SMB; 2-pin header for reset; 2-pin headerfor power on switch
- 2-pin header for power LED; 2-pin header for HDD LED
- On-board buzzer / IrDA (share with COM2)
- I/O on bracket: 1 x DB15 VGA connector, 2 x RJ45 GbE port, 2 x USB2.0
|
| Storage | - SATA: 4 ports (without Raid function)
|
| Watchdog Timer | - Watchdog timeout can be programmable by Software from 1 second to 255 seconds
- Tolerance 15% under room temperature 25°C
|
| On-board RTC | - On-chip RTC with battery backup
- 1 x External Li Battery
- Torrance less than 2sec (24 hours) under 25˚C
|
| ISA Support | - Through PCI to ISA Interface (ITE 8888)
- No ISA Master Devices but ISA DMA Devices
- Maximize ISA Slot support up to 3
|
| System Monitor | - 4 voltage (For +3.3V, +5V, +12V, Vcore)
- 3 Temperatures (CPU, two external Temperature Sensor)
- 3 FANs speed (CPU, System and MCH FANs)
|
| Power Input | - Power source from backplane through PCI/ISA Golden Finger
- Supports both AT or ATX Power Supplies (Automatically, BIOS default: AT Mode)
- When change to ATX, the BIOS default setting is as follow: POWER -SUPPLY TYPE--> [ATX], AUTO PWR-FAILURE RESUME -->[ON]
- +3.3V is Converted from +5V and not directly from Backplane or Power Supply
- +5Vsb (Standby power) is connected from Backplane through 3pins Connectors
- 4 Pins +12V Power Input Connector
|
| Dimensions | - 338.58 mm (L) x 122 mm (W) (13.3" x 4.8")
|
| Environment | - Board level operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 85°C
- Relative humidity: 10% to 90% (Non-condensing) Non-operating 5%~95%, non-condensing
|
| Certifications | |