|
PICMG Single Board Computer
PEAK 870GC
Intel® Core™ 2 Duo LGA775 with 1 x PCI Express Gigabit LAN/4 x SATA/8 x USB 2.0
Main Features
- Intel® LGA775 Core™ 2 Duo/Pentium® 4/Pentium® D/Celeron® D
- Processors with 533/800 MHz
- Supports Dual Channel Non-ECC DDR2 533/667 MHz up to 4GB
- 1 x 82573L PCI Express Gigabit Ethernet LAN
- 4 x SATA, 8 x USB 2.0, 2 x COM , 1 x Parallel , 1 x Floppy
- Intel® 945GC GMCH Integrated Intel® GMA 950, Max 128 MB of DVMT for Graphics Memory Allocation
- Analog Display Supports up to 2048 x 1536 at 85 Hz for CRT
Specifications
| CPU Support | - Support Intel® LGA775 Core™ 2 Duo/Pentium® 4/Pentium® D/Celeron® Dprocessors
- Intel® Embedded Processor List ( Intel® Longevity CPU): Intel® Core™2 Duo Processor E4300 & E2160 Intel® Pentium® 4 Processor 651 & 551 & 531 Intel® Celeron® D Processor 352 & 341 Intel® Celeron® Processor 440
- 533/800 MHz FSB support
| | Main Memory | - 2 x 240-pin DIMM, for up to 4GB dual channel Non-ECC DDR2 533/667 SDRAM
- Note: Maximum 4GB. Actual memorey size is dynamic based on the OS I/O resource allocation
| | Chipset | - Intel® 945GC +ICH7 (PEAK 870GC)
| | BIOS | - Award System BIOS
- Plug & Play support
- Advanced Power Management and Advanced Configuration & Power Interface support
| | On-board LAN | - 1 x Intel® 82573L PCIe Gigabit Ethernet Controllers
- Supports Boot from LAN
| | Display | - Intel® 945G GMCH Integrated Intel® GMA 950, Max 128 MB of DVMT for graphics memory allocation
- Analog display support up to 2048 x 1536 @ 85 Hz for CRT
| | Audio | - AC’ 97 Audio Codec, Realtek ALC655
- 3 x (1x4 pin header) for Line in/Line out/MIC in
| | I/O Interface | - USB 2.0: 8 ports (4 on board, 4 to backplane)
- Serial port: 2 port, with 2x5pin headers
- IDE: 1 x 40-pin connector. Support Ultra ATA 100/66/33
- Disk on Module: 1 x 2-pin power connector for DOM
- SATA HDD: 4 ports,Support RAID 0.1
- Parallel port: 1 x 26-pin connector
- Floppy: 1 x 34-pin connector
- GPIO: Supports 4 sets general purpose I/O each with TTL level (5 V) interface
- On-board buzzer / 2-pin power on button switch
- SMBus 2.0 to backplane
- On-board 2-pin header for reset / 4-pin for PC speaker
- 5-pin for key lock/power LED / HDD Power LED
- 1 x 4-pin fan connector (for CPU); 2 x 3-pin fan connectors (for System)
- 1 x 5-pin JST connector for chassis or backplane front Keyboard/Mouse
- I/O On SBC Bracket: 1 x VGA DB-15 connector; 2 x RJ45 Gigabit Ethernet LAN port; 1 x PS/2 Keyboard/Mouse
| | Watchdog Timer | - 1-minute increments from 1 to 255 minutes
- 1-second increments from 1 to 255 seconds
- On-chip RTC with battery backup
- 1 x External Li-lon battery
| | System Monitor | - 8 voltages (For +1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb)
- 2 temperature
- 3 fan speed monitors
| | Dimensions | - PICMG 1.3 SHB 338.58mm (L) x 126.39mm (W) (13.3" x 4.9")
| | Power Input | - Power source from backplane through golden finger
- Supports both ATX or BTX power supplies
- 4-pin +12 V power input connector:CPU:2 x Core 2 Duo (E6700) 2.66G, Memory: 2 x DDR2 533Mhz 1GB: +12V +5V +3.3V +5Vsb; Full-Loading Mode:4.43A 3.42A 0.63A 0.03A; Light-Loading Mode 2.48A 3.12A 0.65A 0.03A. (NOTE:1.Full Loading: Utilize CPU 100% with Burn-in test running.2.Light Loading: Utilize CPU loading below 5% without data or application running)
| | Environment | - Board level operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
| | Certifications | |
|